Code : BA-PRDX-WACC019  

• High-sensitivy piezoelectric element
• 5 sensitivity settings
• 2.5m (8.2ft) protection range
• Anti-tamper switch

Code : BA-PRDX-WACC013  

• Ideal for entry/exit protection and exit access requests
• Dual Element PIR Sensor
• Anti-tamper switch
• Adjustable lens position (0° or 10°)
• Adjustable alarm signal duration
• Detects body-sized objects for security applications: 6m x 4.5m (20ft x 15ft)
• Detects hand-sized objects for card access applications: 2m x 1.5m (7ft x 5ft)

Code : BA-PRDX-WACC015  

• Conventional solid-state relay operation
• Full audio and infrasonic spectrum analysis
• 7 frequency digital filters, digital amplifier gain & frequency fluctuation assessment
• Impact & shock wave analysis; High-immunity to RFI and EMI signals
• Adjustable sensitivity setting: covers 4.5m (15ft) to 9m (30ft)

Code : BA-PRDX-WACC017  

• 16 meter distance dual Mironel optic detectors
• Active Anti-Mask IR detection (Clean Lens notice - NV75MX)
• 12 meter SeeTrue range NV75MW
• EVO bus connection NV75MX
• Wireless internal frequency selection NV75MR
• Pet Immunity or Creep Zone detection (mechanically selected)
• Dual/Single Edge operation
• Dual Tamper (cover and wall)
• Wall or corner-mount (Optional bracket)

Code : BA-PRDX-WACC011  

• Extremely reliable and false-alarm free
• Dual optics (2 dual opposed element sensors)
• Provides superior pet immunity
• Immune to pets weighing up to 40kg
• 11m (35ft) X 11m (35ft)
• 90° viewing angle
• Anti-tamper switch
• Can be used with SB469 Swivel-Mount Bracket

Code : BA-PRDX-WACC004  

• Divides the communication bus into two, completely isolated branches (if one output fails, the other will continue to function)
• 1 input port, 2 isolated output ports
• Each output port provides communication to modules at a distance of up to 900m (3000ft)

Code : BA-PRDX-WACC006  

• Reports control panel events via IP to the Paradox IPR512 GPRS/ IP Monitoring Receiver and/or IPRS-7 GPRS / IP PC Receiver Software
• Built-in web interface for easy configuration (requires port forwarding configuration)
• Controls and monitors a control panel through an IP network (LAN/ WAN/ Internet)
• Views Live status of all zones and partitions (e.g. open/close, arm/disarm, troubles and alarms) via web browser
• Arm/Disarm individual partitions via web browser
• Event log on web interface; displays last 64 events.
• Send notifications and alarm system events via email
• SSL support for sending secured emails via a secure sockets layer
• HTTPS support for improved security
• Two I/Os on board; controlled via the webinetrface, triggering an email
• Enables iParadox, NEware, or BabyWareto access your system through the Internet
• ParadoxMyHome available for dynamic IP address
• Very low bandwidth consumption
• Built-in clip for mounting in a metal box
• Supports multiple languages

Code : BA-PRDX-WACC008  

• Provides the ability to automatically print live or stored events
• Provides an interface between an EVO control panel and a third party peripheral system
• Supports ASCII/ C-Bus protocols
• 16 virtual inputs to trigger an action in the peripheral system based on an event received from the peripheral system, using ACSII or C-Bus protocol
• 30 virtual PGMs to trigger an action in the peripheral system based on an event received from the EVO control panel, using ACSII or C-Bus protocol
• USB port for PC connections
• Parallel and serial port for printer connections
• 2048 event buffer
• Automatically / manually prints reports of zone / system events via printer or PC
• Available in multiple languages
• In-field firmware upgradable via a CV4USB

Code : BA-PRDX-WACC010  

• Dual element PIR sensor managed by Full Authority Digital Electronics Control (FADEC)
• Auto-Pulse Signal Processing (APSP) and Dual Edge Processing with settings for normal or high interference environments
• Auto temperature compensation
• Anti-tamper switch
• Can be used with SB100 Wall and Ceiling Bracket
• Digital sensitivity trimmer adjustment with 5 range levels
• 10m (33ft) X 10m (33ft)
• 102° viewing angle

Code : BA-PRDX-WACC002  

• Expansion of 8 additional zones
• Supports SP, MG and EVO
• 4-wire bus connection
• Status LEDs for zones, power and bus data (ZX82)
• Enclosure with cover lock mechanism (ZX82)
• On-board Tamper (ZX82)
• Firmware upgradeable
• 1 PGM output, 50 mA PGM (ZX8)