Paradox GPRS / GSM Communicator Module
Code : BA-PRDX-WACC007
- Reports events to the Paradox IPR512 GPRS/ IP Monitoring Receiver and/or IPRS-7 PC Receiver Software
- Instant notification of panel supervision loss
- Easily Arm/Disarm the system via SMS
- Reports alarms via text messages to up to 16 cellular phone numbers
- Simple installation with 4-wire serial connection
- Supports 2 cellular provider SIM Cards for provider redundancy
- Tamper switch support
- Messages are secured with 256-bit (AES) encryption
- Optional rod antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength
Related products
Paradox Sensors & Accessories
Code : BA-PRDX-WACC019
- High-sensitivy piezoelectric element
- 5 sensitivity settings
- 2.5m (8.2ft) protection range
- Anti-tamper switch
Paradox Sensors & Accessories
Paradox 360° Ceiling Mounted Digital PIR Motion Detector (Paradome)
Code : BA-PRDX-WACC014
- Dual element PIR sensor
- Anti-tamper switch
- Auto-Pulse Signal Processing (APSP)
- 4-wire bus connection
- Digital Detection: 7m x 6m @ 2.4m Height / 11m x 6m @ 3.7m Height
- 360° viewing angle
Paradox Sensors & Accessories
Code : BA-PRDX-WACC004
- Divides the communication bus into two, completely isolated branches (if one output fails, the other will continue to function)
- 1 input port, 2 isolated output ports
- Each output port provides communication to modules at a distance of up to 900m (3000ft)
Paradox Sensors & Accessories
Paradox Digital PIR Wired Motion Detector with Pet Tolerance
Code : BA-PRDX-WACC010
- Dual element PIR sensor managed by Full Authority Digital Electronics Control (FADEC)
- Auto-Pulse Signal Processing (APSP) and Dual Edge Processing with settings for normal or high interference environments
- Auto temperature compensation
- Anti-tamper switch
- Can be used with SB100 Wall and Ceiling Bracket
- Digital sensitivity trimmer adjustment with 5 range levels
- 10m (33ft) X 10m (33ft)
- 102° viewing angle
Paradox Sensors & Accessories
Paradox Pro Plus Analog Single-Optic PIR Wired Motion Detector
Code : BA-PRDX-WACC009
- Dual element PIR sensor
- Anti-tamper switch
- Auto-Pulse Signal Processing (APSP)
- Can be used with SB469 Swivel-Mount Bracket
- Extremely high EMI and RFI rejection
- PCB uses only surface mount components
- 11m (35ft) X 11m (35ft)
- 110° viewing angle
Paradox Sensors & Accessories
Code : BA-PRDX-WACC002
- Expansion of 8 additional zones
- Supports SP, MG and EVO
- 4-wire bus connection
- Status LEDs for zones, power and bus data (ZX82)
- Enclosure with cover lock mechanism (ZX82)
- On-board Tamper (ZX82)
- Firmware upgradeable
- 1 PGM output, 50 mA PGM (ZX8)
Paradox Sensors & Accessories
Code : BA-PRDX-WACC013
- Ideal for entry/exit protection and exit access requests
- Dual Element PIR Sensor
- Anti-tamper switch
- Adjustable lens position (0° or 10°)
- Adjustable alarm signal duration
- Detects body-sized objects for security applications: 6m x 4.5m (20ft x 15ft)
- Detects hand-sized objects for card access applications: 2m x 1.5m (7ft x 5ft)
Paradox Sensors & Accessories
Code : BA-PRDX-WACC008
- Provides the ability to automatically print live or stored events
- Provides an interface between an EVO control panel and a third party peripheral system
- Supports ASCII/ C-Bus protocols
- 16 virtual inputs to trigger an action in the peripheral system based on an event received from the peripheral system, using ACSII or C-Bus protocol
- 30 virtual PGMs to trigger an action in the peripheral system based on an event received from the EVO control panel, using ACSII or C-Bus protocol
- USB port for PC connections
- Parallel and serial port for printer connections
- 2048 event buffer
- Automatically / manually prints reports of zone / system events via printer or PC
- Available in multiple languages
- In-field firmware upgradable via a CV4USB