Paradox Magellan Wireless Repeater Module
Code : BA-PRDX-XWACC014
- c/w Transformer, Battery & Plasbox
- Extends the range of wireless communications by another 75m
- Built-in Transceiver
- Supports all MAGELLAN transmitters (including two-way)
- Selects which zone, PGM and/or keypad signals are repeated
- Signal strength display
- RF jamming supervision
- Fully supervised by panel or console
- 1 programmable 5A relay output
- Universal input (N.O./N.C.)
- In-field firmware upgradeable via 307USB
Related products
Paradox Sensors & Accessories
Code : BA-PRDX-XWACC001
- For use with K32RF
- Provides 6 Vdc at 350 mA maximum
- Includes 1 of 5 different power outlets
- Dimensions: 4 x 8 x 7cm (1.6 x 3.1 x 2.8in.)
Paradox Sensors & Accessories
Paradox Wireless Long Range 2-Zone Door Contact (35m distance) c/w 3 “AAA” Batteries
Code : BA-PRDX-XWACC008
- 2-zone capabilities where each zone is independent and has it own serial number
- Zone 1: One of two high-sensitivity reed switches on board (magnet included)
- Zone 2: Universal input (N.O./N.C.)
- Low battery and signal transmission LED
- Anti-tamper switch
- Dimensions: 12.4cm (H) x 4.5cm (W) x 3.3cm (D)
Paradox Sensors & Accessories
Code : BA-PRDX-XWACC015
- Built-in transceiver
- Wireless suren (100 dBA) with integrated strobe light
- Fast alarm response time (within 4 seconds)
- 2.5 hour alarm display (strobe flashes every 4 seconds after bell cutoff)
- Siren presence supervised by control panel
- Dual tamper mechanism (wall/cover)
- Siren test mode
- Signal strength / RF transmission and status LEDs
- Strobe lens available in red / blue
- In-field firmware upgradeable via 307USB
- Wireless range: 35m (RF Freq 433Mhz)
- Dimensions: 13.4cm x 21.17cm x 5.1cm
Paradox Sensors & Accessories
Code : BA-PRDX-XWACC010
- Dual element PIR Sensor
- Auto-Pulse Signal Processing (APSP) with Automatic Temperature Compensation
- Dual tamper mechanism (wall/cover)
- Can be used with SB469 Swivel-Mount Bracket
- Dimension: 11m (35ft) x 11m (35ft)
- 88.5° viewing angle
- Immune to animals weighing up to 18kg
Paradox Sensors & Accessories
Paradox 5-Button (2-way Bi-Directional) Remote Control with Backlit Buttons
Code : BA-PRDX-XWACC002
- RF Frequency: 433 or 868 MHz
- Battery Type: 1x 3V Lithium Battery (CR2032)
- Wireless Range for Typical Residential Environment: 30m (100ft) to 45m (150ft)
- Humidity: 5 to 90%
- Operating Temperature: -10 to 55c (14 to 131F)
- Dimensions/Weight: 7.8 x 3.8 x 1.8cm (3.1 x 1.5 x 0.7in.)/ 23.4g (0.82 oz)
- Supports StayD
- Perform up to 6 different actions per remote control
- Displays system status using visual (LED) and auditory feedback
Paradox Sensors & Accessories
Paradox Wireless Outdoor/Indoor Window and Sliding Door Dual Detector
Code : BA-PRDX-XWACC011
- Outdoor / indoor protection solution for windows and sliding doors
- Pet Immune detection
- Anti-masking - Active IR detection for sprayed liquids and blocking items up to 30 cm (11.8 in.)
- Dual detectors controlled by Full Authority Digital Electronics Control (FADEC)
- Optical pet discrimination geometry to support Super Pet Immunity
- Dual tamper detection
- Creep zone detection
Paradox Sensors & Accessories
Paradox Wireless Mid-size 2-Zone Door Contact (30m distance) c/w 3 “AAA” Batteries
Code : BA-PRDX-XWACC007
- 2-zone capabilities where each zone is independent and has it own serial number
- Zone 1: One of two high-sensitivity reed switches on board (magnet included)
- Zone 2: Universal input (N.O./N.C.)
- Anti-tamper switch
- Available in brown and white
- Built-in strip antenna (printed)
- Dimensions: 11cm (H) x 3.2cm (W) x 2.5cm (D)
Paradox Sensors & Accessories
Paradox Wireless Expansion Module (Compatible with SP and EVO series)
Code : BA-PRDX-XWACC006
- 32 wireless addressable zones
- Maximum number of remote controls: 999 with EVO (32 with SP)
- Remote Control Compatibility: REM1, REM2, REM3, REM15, REM101, RAC1 and RAC2 remote controls
- Supports 16 wireless PGMs
- Supports all MEGALLEN transmitters including 2WPGM
- Supports 2RPT1 and 8 wireless keypads
- RF jamming supervision
- Low battery, tamper and check-in supervision for reconnected modules
- Transmitter signal strength display
- 3 PGM Outputs and 1 optional output:
- In-field firmware upgradeable via 307USB