Paradox 2-Port Hub & Bus Isolator
Code : BA-PRDX-WACC004
- Divides the communication bus into two, completely isolated branches (if one output fails, the other will continue to function)
- 1 input port, 2 isolated output ports
- Each output port provides communication to modules at a distance of up to 900m (3000ft)
Related products
Paradox Sensors & Accessories
Code : BA-PRDX-WACC015
- Conventional solid-state relay operation
- Full audio and infrasonic spectrum analysis
- 7 frequency digital filters, digital amplifier gain & frequency fluctuation assessment
- Impact & shock wave analysis; High-immunity to RFI and EMI signals
- Adjustable sensitivity setting: covers 4.5m (15ft) to 9m (30ft)
Paradox Sensors & Accessories
Code : BA-PRDX-WACC008
- Provides the ability to automatically print live or stored events
- Provides an interface between an EVO control panel and a third party peripheral system
- Supports ASCII/ C-Bus protocols
- 16 virtual inputs to trigger an action in the peripheral system based on an event received from the peripheral system, using ACSII or C-Bus protocol
- 30 virtual PGMs to trigger an action in the peripheral system based on an event received from the EVO control panel, using ACSII or C-Bus protocol
- USB port for PC connections
- Parallel and serial port for printer connections
- 2048 event buffer
- Automatically / manually prints reports of zone / system events via printer or PC
- Available in multiple languages
- In-field firmware upgradable via a CV4USB
Paradox Sensors & Accessories
Paradox Outdoor/Indoor Window and Sliding Door Dual Detector
Code : BA-PRDX-WACC016
- Outdoor / indoor protection solution for windows and sliding doors
- Pet Immune detection
- Anti-masking - Active IR detection for sprayed liquids and blocking items up to 30 cm (11.8 in.)
- Dual detectors controlled by Full Authority Digital Electronics Control (FADEC)
- Optical pet discrimination geometry to support Super Pet Immunity
- Dual tamper detection
- Creep zone detection
- Wired, solid state relay output
Paradox Sensors & Accessories
Paradox Pro Plus Analog Single-Optic PIR Wired Motion Detector
Code : BA-PRDX-WACC009
- Dual element PIR sensor
- Anti-tamper switch
- Auto-Pulse Signal Processing (APSP)
- Can be used with SB469 Swivel-Mount Bracket
- Extremely high EMI and RFI rejection
- PCB uses only surface mount components
- 11m (35ft) X 11m (35ft)
- 110° viewing angle
Paradox Sensors & Accessories
Code : BA-PRDX-WACC002
- Expansion of 8 additional zones
- Supports SP, MG and EVO
- 4-wire bus connection
- Status LEDs for zones, power and bus data (ZX82)
- Enclosure with cover lock mechanism (ZX82)
- On-board Tamper (ZX82)
- Firmware upgradeable
- 1 PGM output, 50 mA PGM (ZX8)
Paradox Sensors & Accessories
Code : BA-PRDX-WACC006
- Reports control panel events via IP to the Paradox IPR512 GPRS/ IP Monitoring Receiver and/or IPRS-7 GPRS / IP PC Receiver Software
- Built-in web interface for easy configuration (requires port forwarding configuration)
- Controls and monitors a control panel through an IP network (LAN/ WAN/ Internet)
- Views Live status of all zones and partitions (e.g. open/close, arm/disarm, troubles and alarms) via web browser
- Arm/Disarm individual partitions via web browser
- Event log on web interface; displays last 64 events.
- Send notifications and alarm system events via email
- SSL support for sending secured emails via a secure sockets layer
- HTTPS support for improved security
- Two I/Os on board; controlled via the webinetrface, triggering an email
- Enables iParadox, NEware, or BabyWareto access your system through the Internet
- ParadoxMyHome available for dynamic IP address
- Very low bandwidth consumption
- Built-in clip for mounting in a metal box
- Supports multiple languages
Paradox Sensors & Accessories
Code : BA-PRDX-WACC013
- Ideal for entry/exit protection and exit access requests
- Dual Element PIR Sensor
- Anti-tamper switch
- Adjustable lens position (0° or 10°)
- Adjustable alarm signal duration
- Detects body-sized objects for security applications: 6m x 4.5m (20ft x 15ft)
- Detects hand-sized objects for card access applications: 2m x 1.5m (7ft x 5ft)
Paradox Sensors & Accessories
Code : BA-PRDX-WACC007
- Reports events to the Paradox IPR512 GPRS/ IP Monitoring Receiver and/or IPRS-7 PC Receiver Software
- Instant notification of panel supervision loss
- Easily Arm/Disarm the system via SMS
- Reports alarms via text messages to up to 16 cellular phone numbers
- Simple installation with 4-wire serial connection
- Supports 2 cellular provider SIM Cards for provider redundancy
- Tamper switch support
- Messages are secured with 256-bit (AES) encryption
- Optional rod antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength