Code : BA-ACC014
- Coverage 12m on each side (40ft) with Pieze sounder
- 2 Alarm relay outputs (N.O. and N.C.
- Advanced temperature compensation
- Reduce false alarms caused by unwanted light and RFI sources
Code : BA-ACC032
- Rust Free
- ABS Plastic
- Aesthetically pleasing design
- Easy to mount
- Separate input for siren horn & strobe
Paradox Sensors & Accessories
Paradox 16M Dual Mironel Optics Pet Immune Anti-Mask Indoor Detectors
Code : BA-PRDX-WACC017
- 16 meter distance dual Mironel optic detectors
- Active Anti-Mask IR detection (Clean Lens notice - NV75MX)
- 12 meter SeeTrue range NV75MW
- EVO bus connection NV75MX
- Wireless internal frequency selection NV75MR
- Pet Immunity or Creep Zone detection (mechanically selected)
- Dual/Single Edge operation
- Dual Tamper (cover and wall)
- Wall or corner-mount (Optional bracket)
Paradox Sensors & Accessories
Code : BA-PRDX-WACC004
- Divides the communication bus into two, completely isolated branches (if one output fails, the other will continue to function)
- 1 input port, 2 isolated output ports
- Each output port provides communication to modules at a distance of up to 900m (3000ft)
Magellan Series
Code : BA-PRDX-MG003
- Controls & displays the status of 32 zones in 2 partitions
- 8 one-touch action buttons
- 3 keypad-activated panic alarms
- Fixed message display that guides you in the operation of the system
- StayD status icon
- displays Arm, Sleep, Stay and Disarmed status for each partition
- Displays troubles, bypassed zones and alarm memory
- Goes into Standby Mode after 20 seconds to save battery life, but remains synchronized with the panel to automatically re-activate upon an entry delay or alarm
- Adjustable backlight
- Independently set chime zones
- Can be used with external 6VDC power adapter as an alternative power source (PA6 not included)
- Available in Multiple languages
- In-field firmware upgradeable via 307USB
Magellan Series
Code : BA-PRDX-MG002
- Controls & displays up to 32 zones in 2 partitions
- 8 one-touch action buttons
- 3 keypad-activated panic alarms
- StayD status LED
- Separate Arm, Sleep, Stay and Off LEDs per partition
- Adjustable key backlight
- Available in multiple languages
- In-field firmware upgradeable via 307USB
Paradox Sensors & Accessories
Paradox 360° Ceiling Mounted Digital PIR Motion Detector (Paradome)
Code : BA-PRDX-WACC014
- Dual element PIR sensor
- Anti-tamper switch
- Auto-Pulse Signal Processing (APSP)
- 4-wire bus connection
- Digital Detection: 7m x 6m @ 2.4m Height / 11m x 6m @ 3.7m Height
- 360° viewing angle
Paradox Sensors & Accessories
Code : BA-PRDX-XWACC003
- RF Frequency: 433 or 868 MHz
- Battery Type: 1x 3V Lithium Battery (CR2032)
- Wireless Range for Typical Residential Environment: 30m (100ft) to 45m (150ft)
- Humidity: 5 to 90%
- Operating Temperature: -10 to 55c (14 to 131F)
- Dimensions/Weight: 6.6 x 3.9 x 1.1cm (2.6 x 1.5 x 0.4in.)/ 35g (1.2 oz)
- Water resistant, slim & ergonomic design
- Perform up to 5 different actions
Paradox Sensors & Accessories
Paradox 5-Button (2-way Bi-Directional) Remote Control with Backlit Buttons
Code : BA-PRDX-XWACC002
- RF Frequency: 433 or 868 MHz
- Battery Type: 1x 3V Lithium Battery (CR2032)
- Wireless Range for Typical Residential Environment: 30m (100ft) to 45m (150ft)
- Humidity: 5 to 90%
- Operating Temperature: -10 to 55c (14 to 131F)
- Dimensions/Weight: 7.8 x 3.8 x 1.8cm (3.1 x 1.5 x 0.7in.)/ 23.4g (0.82 oz)
- Supports StayD
- Perform up to 6 different actions per remote control
- Displays system status using visual (LED) and auditory feedback
Paradox Sensors & Accessories
Code : BA-PRDX-XWACC001
- For use with K32RF
- Provides 6 Vdc at 350 mA maximum
- Includes 1 of 5 different power outlets
- Dimensions: 4 x 8 x 7cm (1.6 x 3.1 x 2.8in.)
Paradox Sensors & Accessories
Paradox 8-port PGM Expansion Module with Enclose & Cover Lock
Code : BA-PRDX-WACC003
- Expansion of 8 programmable outputs
- PGM control via Insite GOLD application
- PGM control with manual on-box switches (PGM82)
- Can follow system events
- Display for each PGM, Data and Power
- Box cover lock mechanism (PGM82)
- Supports SP, MG, EVO and Swan
- Connects to control panel via 4-wire on keypad bus
- Firmware upgradeable
Paradox Sensors & Accessories
Code : BA-PRDX-WACC001
- 8 zones inputs
- 1 PGM output (50mA PGM)
- Users zone input as an anti-tamper switch input