ZKTeco IP Based Fingerprint Access Control & Time Attendance
Code : DA-ZK-FP003
- 2.4-inch TFT LCD Colour Screen
- Fingerprint reader with durable and highly accurate ZK optical sensor (500dpi)
- Stores 1,500 fingerprint templates, 5000 EM cards and 80,000 transactions
- Up to 24 user-defined schedules that can be activated on a daily bell alert (optional)
- Prompt audio acceptance or rejection signals for valid or invalid fingers
- Small size for 86mm (L) x 86mm (H) socket installation
- Communication: RS485, TCP/IP and USB Host
- Wiegand input and output (both sides must use same model), Aux input for linkage
- 12VDC Powered
- Standard access control features such as Time zone, Holiday, A&C Group, Unlock combination etc.
- Duress Alarm offers effective protection against duress by threats
- Tamper proof switch and multiple alarm outputs
- Multi-languages customizable
- Software required: ZKTime.Net 3.0
Related products
Code : DA-ZK-FP002
- Fingerprint Device with RFID card reader
- Card Capacity: 500
- Fingerprint Capacity: 500
- Reads Fingerprint, RFID Cards, PIN and Bluetooth Wireless Access
- Operating Temperature: 0°C ~ 45°C
- 12VDC Powered
- Latest SilkID Fingerprint Sensor Technology (Spoof Finger Detection)
- Size: 101.5mm(L) x 101.5mm (W) x 37mm (H)
- Software: ZKBioBT Apps
- Access Control Interface for 3rd party electric lock, alarm, door sensor, exit button and doorbell
Code : DA-ZK-FP005
- 2.4-inch TFT color screen
- 3000 FP Templates, 5000 Cards, 100K Transactions Capacity
- BioID fingerprint reader with Anti-Interference Technology and Sensor-Activation function.
- Communication: RS232/485, TCP/IP and USB Host
- Wiegand Signal: Input & Output. Optional ADMS firmware
- 12VDC Powered
- Multiple Verification Modes: Multi verification methods (card is optional) providing user various choices
- Anti-passback, access control interface for 3rd party electric lock, door sensor, exit button, alarm and doorbell
- Built-in auxiliary input with enhanced flexibility to link with wired detector or emergency switch
- Wireless door bell (Optional)
- Software supported ZKTime.Net 3.0 / ZKBioTime (require ADMS)
Code : DA-ZK-FP012
- Designed for Fingerprint registration on desktop
- Support fingerprint detection function
- Quick recognition of dry, wet and rough fingerprint
- Available SDK for development
- High Speed USB 2.0
Code : DA-ZK-FP006
- 2.4-inch TFT color screen and Touch keys
- ID: EM Card ; MF: Mifare Card
- 3000 FP Templates, 30K Transactions Capacity, 5000 Cards
- BioID Sensor
- Ultra thin and elegant design
- Anti-passback, access control interface for 3rd party electric lock, door sensor, exit button, alarm
- Standard Wi-Fi
- RS232/485, TCP/IP, USB-host
- Wiegand Signal: Input & Output
- Built-in auxiliary input with enhanced flexibility to link with wired detector or emergency switch
- Multiple Verification Modes: Multi-verification methods (card is optional) providing user various choices
- 12VDC Powered
- Optional ADMS firmware; purchase separately or factory pre-loaded (/ADMS)
Code : DA-ZK-FP010
- IP65 rated enclosure for outdoor use (-WP).
- Built-in EM Card reader.
- Single gang Standard junction box installation.
- Flush-Mounted Design for neat installation.
- RS-485 Communication Interface.
- SilkID Fingerprint Sensor and Support Live Finger Detecting.
- Can be used with inBio, EC10
- Stainless Steel Front casing.
- Optional Fingerprint Protective Cover.
Code : DA-ZK-FP008
- 2.4 Inches TFT-LCD Screen
- SilkID Fingerprint Sensor
- Multiple Verification Modes
- Capacity: Fingerprint 6,000, Card 10,000, Transaction 100,000, User Photo 3,000 & Event Photo 7,000
- Touch Keypad
- 120° Wide Angle Camera; Camera captures user photos & events snapshots to provide attendance evidence
- Communication: RS485, TCP/IP and USB Host.
- ADMS included
- Wiegand input and output, Aux input for linkage
- 12VDC 3A Powered
- Software ZKBioTime / ZKBiosecurity (license required)
- Memory 128MB RAM / 256MB Flash
- Working Temperature: -10 °C ~ 50 °C
- Dimensions: 195.5 × 87 × 35 mm.
Code : DA-ZK-FP009
- Multiple Reading Modes: Fingerprint & Card
- Communication: RS485
- Work with biometric access controllers and fingerprint standalone access control, including inBIO series controllers
- Designed in capturing and transferring fingerprint samples to access control panel.
- IP65: For Outdoor use & durabile in all weather conditions.
Code : DA-ZK-FP011
- Energy-saving, auto-sleep ZK infrared fingerprint sensor
- Built-in Card Reader: 125KHz EM card, optional 13.56Mhz Mifare card (-M)
- Supports password when working with inBIO series control panels
- LED and Buzzer prompt
- With doorbell function
- Dimensions: 88 x 88 x 33.6mm (socket type installation)